Training and Events

In this class, attendees will learn about proper heat pump sizing / coil matching/ Thermostat selection / wiring and operation. They will also learn about AC airflow and proper charging.  Course Instructor: Larry Lemens  
04/20/2023 4:00 PM to 04/20/2023 6:30 PM

This class will focus on the basics of electricity, electrical circuit diagnostics, and LC ii communicating circuit diagnostics. Course Instructor: Keith Wildhaber, Gustave A. Larson
04/20/2023 4:00 PM to 04/20/2023 8:00 PM

In this class attendees will get an introduction to the new Link communicatimg system, components and compatability. Course Instructor: Larry Lemens  
04/25/2023 11:30 AM to 04/25/2023 12:30 PM

In this class, attendees will learn about proper heat pump sizing / coil matching/ Thermostat selection / wiring and operation. They will also learn about AC airflow and proper charging.  Course Instructor: Larry Lemens  
04/25/2023 4:00 PM to 04/25/2023 6:30 PM

Installation practices, checking refrigerant charge and indoor airflow setup will be covered. Course Instructor: David Philibert, Gustave A. Larson  
04/25/2023 5:00 PM to 04/25/2023 7:00 PM

In this class attendees will get an introduction to the new Link communicatimg system, components and compatability. Course Instructor: Larry Lemens  
04/26/2023 11:30 AM to 04/26/2023 12:30 PM

In this class, attendees will learn about proper heat pump sizing / coil matching/ Thermostat selection / wiring and operation. They will also learn about AC airflow and proper charging.  Course Instructor: Larry Lemens  
04/26/2023 4:00 PM to 04/26/2023 6:30 PM

Installation practices, checking refrigerant charge and indoor airflow setup will be covered. Course Instructor: David Philibert, Gustave A. Larson  
04/26/2023 5:00 PM to 04/26/2023 7:00 PM

In this class participants will acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P series systems. Throughout the 2-day Mr. Slim Service Course you will: • Be introduced to the concepts and theories of Mr. Slim system operation • Be given a....
05/02/2023 8:00 AM to 05/03/2023 5:00 PM

In this class participants will acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P series systems. Throughout the 2-day Mr. Slim Service Course you will: • Be introduced to the concepts and theories of Mr. Slim system operation • Be given a....
05/10/2023 8:00 AM to 05/11/2023 5:00 PM