Training Class Recordings and More!

Take a look below to browse recorded trainings from previous weeks.

General Information:

Navigating Regulation Changes in 2023 and Beyond 11/11/22 - Alex Ayers, HARDI Presents

Comfort Link ii Comm. Diagnostics - Fall 2022  with Keith Wildhaber

Electrical Basics and Diagnostics - Fall 2022

Heat Pump Fundamentals - Fall 2022 with Ethan Smith

Why Compressors Fail Pt. 1 (Spring 2022) with Ethan Smith - Why compressors fail, the ins and outs of compressor failure and diagnostics of why and how to prevent premature compressor failures. 
Why Compressors Fail Pt. 2 (Spring 2022) with Ethan Smith - Why compressors fail, the ins and outs of compressor failure and diagnostics of why and how to prevent premature compressor failures. 

AC & Heat Pump Diagnostics (Spring 2022) with David Philibert - Operation and troubleshooting Electrical components.

Electrical Fundamentals with Keith Wildhaber - Attend this class to learn and understanding the basics of electricity, what your meter is telling you and basic electrical component operation

ECM/CTM Motor Troubleshooting with Larry Lemens - We will introduce you to the CTM and ECM motors.

Customer Etiquette and How to Approach Every Call with Chris Elam - This course will cover how to interact with different customers to provide a positive customer experience and to best serve customer's needs.

AC/HP Tune Ups and Service Best Practices with Chris Elam - Part 1 - This course will cover the best practices and procedures for AC/HP service, troubleshooting for common issues and how to make your next service trip more efficient and profitable.

AC/HP Tune Ups and Service Best Practices with Chris Elam - Part 2 - This course will cover the best practices and procedures for AC/HP service, troubleshooting for common issues and how to make your next service trip more efficient and profitable.

Refrigeration:
Spring 2023 - Ice -o-Matic CIM streamed training session
Spring 2022 - Refrigeration Regulations and Retrofit - Bill Wilkin, Sporlan
Spring 2022 - Refrigeration Regulations and Retrofit - Andrew Pansulla, Chemours

Commercial:
SRP: Applications, Design & Layout - August 2022
SRP- Applications, Design and Layout
SRP: Introduction to Series GRT

Parts and Accessories:
Aprilaire- Effective Virus Protection

Aprilaire Successful Dehumidifier Sales

Fieldpiece: Easier, Faster, Better - This course will cover the selling points and value proposition of Fieldpiece’s core product offering, including the Job Link® System, SMAN™ Refrigerant Manifolds and SC Series Power Clamp Meters. 

Fieldpiece: Recovery and Vacuum Made Easy - This course will cover the selling points and value proposition of Fieldpiece’s industry best MR45 Refrigerant Recovery Machine and VP85/VP55 Vacuum Pumps.

Inficon D-TEK Stratus Training and Leak Detection Best Practices - Learn about electronic leak detection best practices with a concentration on the D-TEK Stratus from Inficon.

Nu Calgon iWave Product Overview

RGF Commercial and Residential Product Overview - Join this class to learn about RGF's Residential and Commercial lines of products.

Sanuvox Product Overview - Commercial/Residential Applications with Jay Carter

SRP Outdoor Living Product Overview

Mitsubishi:

Mitsubishi Intelli-Heat A-Coil Overview 3/22/23 - With Andy Senti, Mitsubishi

Mitsubishi Intelliheat Launch / Q & A session March 2023 with Larry Lemens and other Service Advisors - Introduction to PAA Intelli-heat coils

Mitsubishi Inverter Technology with Bill Snyder - Learn how DC and AC (Alternating Current vs. Direct Current) electricity can travel through the same wire.

Mitsubishi M & P Install & Service with Larry Lemens - Learn basic installation techniques, system start up and basic service for all Mitsubishi M&P Systems.

Mitsubishi M & P Products- Session 1 with Bill Snyder - Learn the features, benefits and specifications for Mitsubishi's M&P product line.

Mitsubishi M & P Products- Session 2 with Bill Snyder - Learn the proper application, design, installation, startup and operation best practices for Mitsubishi M&P products.

Mitsubishi M & P Products- Session 3 with Bill Snyder - Learn the functional overview and how to troubleshoot Mitsubishi M&P products.

Finding the Correct Mitsubishi Part with Bill Snyder - Learn how to use Mitsubishi's MyLinkDrive to identify service parts.

Mitsubishi M & P with Ethan Smith - Learn basic installation techniques, system start up and basic service for all Mitsubishi M&P Systems. 4 CEUS.

Rheem:

Rheem Contractor App & Technology wtih Chris Elam

Rheem R96V 2 Stage Installation and Service Best Practices with Chris Elam - This comprehensive course covers features, installation, and service of the Rheem R96V 2 stage variable speed furnace.

Rheem inverter Charging 101 with Chris Elam

Rheem Econet Zoning with Chris Elam

Rheem Top Tech Heat Pump Service and Installation with Chris Elam - This class will cover installation, service, maintenance, and charging of Rheem 14-16 seers heat pumps.

Rheem Top Tech AC Service and Installation with Chris Elam - This single stage AC training program explores many aspects of installing, servicing, and maintaining 13 to 16 seer Rheem AC systems.

Rheem Heat Pump Install and Service with Chris Elam - Learn the TopTech 14–16 SEER Heat Pump Systems training program to discuss practical service techniques in both Rheem® air conditioning (AC) and Rheem heat pump systems.

Rheem 90% Gas Furnace Training with Chris Elam - Comprehensive course on installation and service best practices for Rheem 90% gas furnaces.

Rheem Inverter Training- Part 1 with Chris Elam - This is a two-part comprehensive course on installation and service best practices for Rheem Inverter products. The first class will cover installation components and air handler setup. 2 CEUs.

Rheem Inverter Training- Part 2 with Chris Elam​​​ - This is a two-part comprehensive course on installation and service best practices for Rheem Inverter products. The second class will cover electronic expansion valve coils, condensers and service troubleshooting. 2 CEUs.

Rheem Modulating Gas Furnace Installation and Service  – Part 1 with Chris Elam - This first class will cover installation and components.

Rheem Modulating Gas Furnace Installation and Service – Part 2 with Chris Elam - This second class will cover sequence of operation and service troubleshooting.

Rheem Air Handler Install and Service with Chris Elam - This Air Handler course instructs technicians in installation and service procedures related to Rheem air handler equipment, duct system design and basic indoor airflow setup.

Trane/American Standard:

Trane and American Standard S-Series Furnace Installation & Service Best Practices with Larry Lemens - In this class we will review of S9 furnaces with focus on install and service best practices. We will also review heat pump installation and operation proper processes.

How to Look Up Parts on Trane, American Standard and Mitsubishi Sites with Larry Lemens - In this class, we will go to Trane's ComfortSite, American Standard's ASDealer Net and Mitsubishi's MyLink Drive websites to show how to look up parts, manuals for equipment and other information on the manufacturer sites.

Advanced Electrical Diagnostics with Ethan Smith - This course covers basic motor operating and diagnosis, capacitor sizing, starting circuits, ECM motor troubleshooting, 3 phase power theory, application and diagnosis.

American Standard/Trane Rooftop Service with Larry Lemens - This class will go over start up procecdures, setting proper airflow and troubleshooting for the controls and the economizer.

Adding Residential Accessories to Your Trane or American Standard Furnaces with Larry Lemens - This class will go over commonly used accessories with Residential installations.

Zoning Theory and Setup with Ethan Smith - This class will review the basics of design and theory of operation for zoning.

Trane Symbio Product Overview with Larry Lemens - We will introduce Symbio controls which are replacing Reliatel in Trane and American Standard Commercial products.

Electrical Diagnostics Theory- Part 1 with Ethan Smith - Learn the fundamentals of electricity and how to apply them to diagnostics of HVACR equipment.

Electrical Diagnostics Theory – Part 2 with Ethan Smith - Learn the fundamentals of electricity and how to apply them to diagnostics of HVACR equipment.

​​​​​Trane Comfortsite Tips with Larry Lemens - Join this class to learn about all the sales, marketing and product resources located on the Trane ComfortSite or AS Dealernet sites.

Trane and American Standard Variable Speed Furnace with Larry Lemens - Gain an in-depth knowledge and skills needed to install and troubleshoot Trane or American Standard Variable Speed Condenser. The class focuses on installation, start-up and troubleshooting.

Trane RTU Troubleshooting with Larry Lemens

Trane S Series Furnace Training with Larry Lemens - This class highlights the features and benefits of the Trane/Americans Standard S-Series furnace including the set-up, wiring configurations and installation.

Heat Pump Basics with Ethan Smith - In this class participants will learn design and installation considerations, basic operations of system components, sequence of operation, controls setup, electrical and mechanical troubleshooting, defrost controls, refrigeration circuit components.

Trane S-Series Furnace Training with Larry Lemens